- What is active and passive mode?
- How do I turn passive mode off?
- Are transistors used today?
- Why is FET better than BJT?
- What is PNP transistor?
- When would you use a transistor?
- Why BJT is called bipolar?
- Are BJTs still used?
- How do transistors work?
- What are the two types of BJT?
- What is the difference between BJT and FET?
- What is Q point in transistor?
- What is active mode in transistor?
- What is the symbol of BJT?
- What is passive mode?
- What is meant by inverted mode of operation of a transistor?
- How does a BJT work?
- What is a passive command?
What is active and passive mode?
In an active mode connection, when the client makes the initial connection and sends PORT, the server initiates the second connection back.
In a passive connection, the client connects and sends the PASV command, which functions as a request for a port number to connect to..
How do I turn passive mode off?
To disable Passive Mode you simply hold your Select(PS3) button or Back(Xbox 360) button to open the Interaction Menu, scroll down to Passive Mode and select it to disable it.
Are transistors used today?
By far the most common application of transistors today is for computer memory chips—including solid-state multimedia storage devices for electronic games, cameras, and MP3 players—and microprocessors, where millions of components are embedded in a single integrated circuit.
Why is FET better than BJT?
FETs offer greater input impedance than BJTs. This means that they practically draw no current and therefore do not load down the power circuit that’s feeding it. BJTs offer greater gain at the output than FETs. The gain (or transconductance) of FETs are smaller than for BJTs.
What is PNP transistor?
The PNP Transistor is the exact opposite to the NPN Transistor device we looked at in the previous tutorial. … Then, PNP transistors use a small base current and a negative base voltage to control a much larger emitter-collector current.
When would you use a transistor?
One of the most common uses for transistors in an electronic circuit is as simple switches. In short, a transistor conducts current across the collector-emitter path only when a voltage is applied to the base. When no base voltage is present, the switch is off. When base voltage is present, the switch is on.
Why BJT is called bipolar?
device is often called the bipolar junction transistor because its operation requires that the negatively charged electrons and their positively charged counterparts (the holes corresponding to an absence of electrons in the crystal lattice) coexist briefly in the presence of one another.
Are BJTs still used?
Yes, BJTs are still used. BJTs have higher transconductance, which gives them higher gain. They are ideal for amplifiers, where you want to maximize the gain. … There is actually considerable amount of research going on in how to replicate the BJT performance in CMOS technology, especially for satellite applications.
How do transistors work?
A transistor works when the electrons and the holes start moving across the two junctions between the n-type and p-type silicon. … By turning a small input current into a large output current, the transistor acts like an amplifier. But it also acts like a switch at the same time.
What are the two types of BJT?
A bipolar transistor (bipolar junction transistor: BJT) consists of three semiconductor regions forming two junctions. There are two types of structure: npn and pnp. Products with npn up to 800 V and pnp up to -600 V are available. In addition, there are also bias resistor built-in transistors (BRTs).
What is the difference between BJT and FET?
BJT and FET are electronic devices. The basic difference between BJT and FET is that the bipolar junction transistor is the bipolar and current control device, while FET (field effect transistor) is the unijunction transistor. It is a voltage control device.
What is Q point in transistor?
Q point or the operating point of a device, also known as a bias point, or quiescent point is the steady-state DC voltage or current at a specified terminal of an active device such as a diode or transistor with no input signal applied.
What is active mode in transistor?
A transistor is said to be in its active mode if it is operating somewhere between fully on (saturated) and fully off (cutoff). Base current regulates collector current. By regulate, we mean that no more collector current can exist than what is allowed by the base current.
What is the symbol of BJT?
It is solid state device that flows current in two terminals, i.e., collector and emitter and controlled by third device known as terminal or base terminal. Unlike a normal p-n junction diode, this transistor has two p-n junctions. The basic symbols of BJT are n-type and p-type.
What is passive mode?
“Passive mode” means that the server will be “passive” and accept data connections from the client, instead of requiring the client be able to accept connections back from the server. (This unusual behavior of server-to-client connections is unique to the FTP protocol.)
What is meant by inverted mode of operation of a transistor?
Certain types of discrete transistors, the NPN 2N2222 and the PNP 2N2907, can be operated as inverted mode switches where “inverted” means that the collector is made to serve as an emitter and the emitter is made to serve as a collector.
How does a BJT work?
A BJT is a type of transistor that uses both electrons and holes as charge carriers. A signal of small amplitude if applied to the base is available in the amplified form at the collector of the transistor. This is the amplification provided by the BJT.
What is a passive command?
A verb is in the passive voice when the subject of the sentence is acted on by the verb. For example, in “The ball was thrown by the pitcher,” the ball (the subject) receives the action of the verb, and was thrown is in the passive voice.